News: HyperSizer.com has a Community Board and Customer Support System. Submit a ticket at http://hypersizer.com/ticket

Author Topic: Importing material properties from a FEM in HZ 5.8.11  (Read 40917 times)

James.rogers@nasa.gov

  • Client
  • **
  • Posts: 12
    •  
Importing material properties from a FEM in HZ 5.8.11
« on: May 01, 2023, 03:39:01 PM »
I recently gained access to an older version of hypersizer (5.8.11), and I am struggling to identify a way to import material properties from my FEM. Does that functionality exist in this version of hypersizer, or am I only able to import materials from other hypersizer databases?

James

  • Administrator
  • *****
  • Posts: 286
    •  
Re: Importing material properties from a FEM in HZ 5.8.11
« Reply #1 on: May 02, 2023, 09:04:31 AM »
You cannot import material data from FEM (.bdf/.dat) in v5.8. However, you can import the FEM and have it automatically setup the laminates, plate thicknesses and bar sections if you sync-up the FEM material IDs before importing. However, that requires you to manually define the materials prior to importing the FEM.

-James