News: Need training? HyperSizer Training Videos are available now! Learn more here: https://hypersizer.com/trainingevents/e-learning/

Author Topic: Discrepancy between ply count and thickness with effective laminates  (Read 34902 times)

Tom Dragone

  • Client
  • **
  • Posts: 7
    •  
I've noticed a discrepancy between the optimized thickness result and the optimized ply count for some of the effective laminate components in my model.  I've set up my thickness bounds with a step size equal to the ply thickness (0.0084 in this case).  For one example, the optimized thickness comes out to 0.025in, the equivalent of 3 plies, but the optimized ply count is listed as 4 with optimized breakdown of 0%/50%/50% for 0/45/90 % and 0/2/2 for the 0/45/90 #.  I see that it is not possible to have a 3-ply laminate with 0/50/50% breakdown, so I gues that this is causing the discrepancy, but I am unclear about what HyperSizer is using for subsequent failure calculations: is it basing local stresses and failure calculations on the 3-ply 0.0252in thickness or the 4-ply 0.0336in thickness?  Furthermore, what should I do to resolve this issue: eliminate the 0/50/50% effective laminate from my laminate candidate list and force stress and failure calculation for a 3-ply laminate sequence or change the minimum thickness bound to 0.0336 to force a thickness consistent with the preferred ply sequence?

James

  • Administrator
  • *****
  • Posts: 286
    •  
Re: Discrepancy between ply count and thickness with effective laminates
« Reply #1 on: July 19, 2014, 10:58:53 AM »
For strength analysis, the effective laminate is treated as a pseudo three stack laminate. See: http://hypersizer.com/help/#Materials/EffLam/el-using_struct_analysis.php%3FTocPath%3DFeatures%7CMaterials%7CEffective%2520Laminates%7CUsing%2520Effective%2520Laminates%7C_____1

The middle stack is a smeared orthotropic ply that makes up the majority of the laminate thickness. In your case, the effective material stiffness from the 0%/50%/50% material is used with the thickness listed on the sizing form (0.025in). This thickness and stiffness is used to calculate the effective laminate ABD stiffness.

Failure is evaluated at the IML/OML of the effective laminate. The laminate strains are localized into ply-based strains in each ply angle present in the effective laminate. Since you only have 45/90 degree plies in your effective laminate, then HyperSizer will only evaluate ply-based failure for 45/90 plies using the strains at the IML/OML. Since you are using effective (smeared) laminates, HyperSizer treats the IML/OML strains as ply strains and checks the lamina failure criteria for each ply direction because it doesn't know the preferred stacking sequence. This is a conservative approach for strength analysis of effective laminates.

So why is HyperSizer displaying 4 plies (2 plies 45, 2 plies 90)? Since you have a 0%/50%/50% effective laminate and a 3 ply laminate, HyperSizer is showing an additional ply in the sizing form to achieve the desired ply percentage. **The ply counts in the sizing form do not affect the analysis of the effective laminate. This is just a reporting issue for thin laminates. The true laminate effective thickness displayed on the sizing form is used for strength analysis of the effective laminate.

There does seem to be an inconsistency with the effective analysis for thin laminates where HyperSizer is using a 0%/50%/50% effective laminate but choosing 3 plies thickness. We need to figure out the best way to handle this in future versions. Perhaps it should not be allowed to choose a 3 ply thickness and select the 0%/50%/50% effective laminate since it is not possible to meet this ply percentage at that thickness. Keep in mind that the purpose of the effective laminate sizing is to help HyperSizer obtain ply count targets to use to create discrete laminates. The inconsistency will be resolved when the discrete laminates are automatically created and the part is sized with the actual laminate stacking sequences.