HyperSizer Support Forum
Software Use => HyperSizer Stress Reports => Topic started by: Stressed on June 13, 2009, 09:19:48 AM
-
In the stress report the applied load lb/in is shown and the applied strain is shown for reference.
For the laminate failure theory stress reports could Collier show the analysis to derive the applied strain. We have Et, Ec and ED (Average modulus). Showing sigma = P/A and E = stress / strain is. simple, the user needs to be aware of the Modulus assumption used in the derivation of the applied strain. Thanks
-
Collier will include the stiffness assumptions used to derive he laminate applied strain in a future revision of Hypersizer