HyperSizer Support Forum

Software Use => FEM Coupling (HyperFEA) => Topic started by: orchidworld on August 01, 2012, 09:45:08 PM

Title: Regarding "Load Cases"
Post by: orchidworld on August 01, 2012, 09:45:08 PM
Load Cases: A load case can either consist of a single mechanical or thermal load set or a combination of the two

I have a question: there are many load sets(mechnical), Whether is it possible consist of two or more mechical load sets???
For example:
mechnical load set:  A   B   C   D
Thermal load set: a
possible group: A+B+a    or others......

Thanks
Title: Re: Regarding "Load Cases"
Post by: James on August 02, 2012, 08:16:52 AM
HyperSizer v6.3 will have this functionality. The user will be able to combine multiple mechanical and thermal load sets into a single load case. Scaling factors will also be provided to allow the user to scale the mechanical/thermal loads in each load case. This is similar to a Nastran SUBCOM.

This is not supported in v6.2.

In v6.2 you may only combine 1 mechanical load set and 1 thermal load set.