HyperSizer Support Forum
Engineering & Analysis Methods => Bolted Joints => Topic started by: Stressed on July 07, 2009, 08:31:12 AM
-
What are the general assumptions used in the BJSFM analysis
-
For a standard bearing and bypass analysis, the BJSFM general assumptions include:
a) Pan head fastener (Csk requires a correction)
b) Infinitely wide panel (E/D and W/D could require a correction)
c) Uniform bolt bearing load (double shear test configuration), (Single shear configuration requires a correction)
d) Finger tight fastener
e) Joint laminate is between 40% and 60% 45 deg plies
f) Do default = 0.016 (Ref MIL HDBK 17), (Do is also user defined)
g) Lamina analysis (pristine allowables)
h) Maximum strain theory (alternate failure options available)