HyperSizer Support Forum

Engineering & Analysis Methods => Bolted Joints => Topic started by: Rocketman007 on June 11, 2009, 02:32:59 PM

Title: BJSFM - Can I plot the stress /strain or displacement at the hole
Post by: Rocketman007 on June 11, 2009, 02:32:59 PM
Can I plot the stress /strain or displacement at the hole?
Title: Re: BJSFM - Can I plot the stress /strain or displacement at the hole
Post by: Rocketman007 on June 11, 2009, 02:38:15 PM
Yes Hypersizer can plot the stress , strain and displacement at the hole (Hypersizer V5.6.38)

Execute a component BJSFM analysis

In the graphics window click the "Window" icon

Then click "show component hole deformation"

Then select stress, strain or deformation

The plot is shown in the graphics window on the  LHS