HyperSizer Support Forum
Software Use => Creating & Editing Composite Laminates => Topic started by: ohba on March 23, 2009, 01:13:58 PM
-
I have a question regarding the laminate defintion form
I am using a laminate already defined in an existing database.
I would like to know what are the column L1, L2 and L3 between the column corresponding to the angle and the column corrsesponding to the thickness ?
These columns also include little toggle switch.
So I'm guessing it is to turn off some plies in the laminate definition (ply drop off ?). But then how do I specify which one of the L1, L2 or L3 definition is actually being used in my analysis?
-
These L2, L3 and L4 columns are used when defining a "hyper-laminate" which is used to define ply drops between the upper flange, web, and lower flange of a stiffened panel.
Please see the following topics and let me know if you still have questions about this method:
http://hypersizer.com/faq/index.php?topic=29.0
http://hypersizer.com/faq/index.php?topic=105.0
http://hypersizer.com/faq/index.php?topic=46.0
http://hypersizer.com/faq/index.php?topic=16.0