HyperSizer Support Forum

Software Use => Scripting => Topic started by: Ruben on February 26, 2013, 04:36:16 AM

Title: Assigning Materials to Uniaxial Stiffened Panels
Post by: Ruben on February 26, 2013, 04:36:16 AM

Hello,

I am using your spreadsheet utility version 6.2. When I try to set the materials for a Uniaxial Stiffened Panel, using *GroupMaterial, if I only set a Top Face material, i.e. code 1, this works correctly, however, if I then set a Web material, code 2, the Top Face material is removed and all materials are added to the Web material.

Top face and core material are set correctly for Unstiffened Plate/Sandwich Panel Family.

Regards,
Ruben

Title: Re: Assigning Materials to Uniaxial Stiffened Panels
Post by: Ryan on February 26, 2013, 08:19:27 AM

Ruben,

What version of 6.2 are you using? I believe this bug was fixed in 6.2.46. You can contact us to get an update.

http://hypersizer.com/corporate/contact-us.php?subject=Request%20Software%20Download

-Ryan

Title: Re: Assigning Materials to Uniaxial Stiffened Panels
Post by: Ruben on February 27, 2013, 12:30:15 PM

Hi Ryan,

We are using 6.2.24, our point of contact will get in touch with you.

Thanks,
Ruben