HyperSizer Support Forum

Engineering & Analysis Methods => Bolted Joints => Topic started by: Rocketman007 on June 11, 2009, 02:03:54 PM

Title: BJSFM - Analysis Angles
Post by: Rocketman007 on June 11, 2009, 02:03:54 PM
The code BJSFM allows a user input for the analysis angle increment. How do I the angular increments in Hypersizer for the determination of stress and strain around the hole.
Title: Re: BJSFM - Analysis Angles
Post by: Rocketman007 on June 11, 2009, 02:07:58 PM
The analysis angular increment is not user defined. Hypersizer defaults to a 5 deg analysis increment when calculating the stress and strain around the circumference of the hole.

0 deg is defined by the shell element Material axis. This angle should be consistent with the laminate fiber directions.