HyperSizer Support Forum

Suggestions & Feedback => Suggestions & Feedback => Topic started by: Stressed on July 31, 2009, 09:43:47 AM

Title: Buckling - Panels with holes (Orthotropic and Isotropic Materials)
Post by: Stressed on July 31, 2009, 09:43:47 AM

A suggestion for a future upgrade

A large number of panels in wing spars, ribs and skin have access or lightening holes. Hypersizer should have the capability to calculate the buckling allowable for a panel with a circular hole. More complex configurations would require a detailed FEM.