HyperSizer Support Forum

Software Use => FEM Coupling (HyperFEA) => Topic started by: hunterqiu on June 29, 2009, 04:11:33 AM

Title: HyperFEA Options
Post by: hunterqiu on June 29, 2009, 04:11:33 AM

HyperSizer,

on page8 in the paper "CLV Upper Stage Common Bulkhead Sizing with HyperFEA", the interface of HyperFEA Option is like picture1; but in version 1.1.2 which I use, the interface is shown as picture 2.

are they two different version? which one is newer?

thanks

Title: Re: HyperFEA Options
Post by: Phil on June 29, 2009, 08:52:33 AM

HyperFEA Version 1.1.2 is the latest version of HyperFEA for use with HyperSizer Version 5.3 and up.

The latest version of HyperFEA can always be obtained from the webpage:

http://hypersizer.com/downloads.html


However, it appears that you already have the latest version.

The other snapshot is an older version of HyperFEA.

Note that in future versions of HyperSizer (starting with Version 5.7), HyperFEA will be bundled with HyperSizer, therefore when you update HyperSIzer, you will alsways be sure to have the latest version of HyperFEA.