HyperSizer Support Forum

Software Use => Miscellaneous Software Topics => Topic started by: bbgreer on January 22, 2015, 04:27:51 PM

Title: Pressure loads shown when plotting "Element Temperature for Load Set"
Post by: bbgreer on January 22, 2015, 04:27:51 PM
Nx, Ny, Nxy FEA loads are verified in FEM viewer; however, values for the "element temperature for load set" plot are not correct.  It appears to be the pressure values.

In the pressure load set plot, no values are plotted.   

This FEA model has both TEMP and PLOAD4 Nastran cards.

How can I verify the Hypersizer has properly imported?  Thank you!