News: HyperSizer.com has a Community Board and Customer Support System. Submit a ticket at http://hypersizer.com/ticket

Author Topic: Assigning Materials to Uniaxial Stiffened Panels  (Read 18572 times)

Ruben

  • *
  • Posts: 40
    •  
Assigning Materials to Uniaxial Stiffened Panels
« on: February 26, 2013, 04:36:16 AM »
Hello,

I am using your spreadsheet utility version 6.2. When I try to set the materials for a Uniaxial Stiffened Panel, using *GroupMaterial, if I only set a Top Face material, i.e. code 1, this works correctly, however, if I then set a Web material, code 2, the Top Face material is removed and all materials are added to the Web material.

Top face and core material are set correctly for Unstiffened Plate/Sandwich Panel Family.

Regards,
Ruben

Ryan

  • Administrator
  • *****
  • Posts: 145
    •  
Re: Assigning Materials to Uniaxial Stiffened Panels
« Reply #1 on: February 26, 2013, 08:19:27 AM »
Ruben,

What version of 6.2 are you using? I believe this bug was fixed in 6.2.46. You can contact us to get an update.

http://hypersizer.com/corporate/contact-us.php?subject=Request%20Software%20Download

-Ryan

Ruben

  • *
  • Posts: 40
    •  
Re: Assigning Materials to Uniaxial Stiffened Panels
« Reply #2 on: February 27, 2013, 12:30:15 PM »
Hi Ryan,

We are using 6.2.24, our point of contact will get in touch with you.

Thanks,
Ruben