News: Contact us to upgrade your software!

Author Topic: Enum VariableParameterDefinition for Tapered Angle of Tapered Circular Tube  (Read 20308 times)

RD

  • *
  • Posts: 5
    •  
what is the Enum VariableParameterDefinition for Tapered Angle of a Tapered Circular Tube?
oComp.ResultVariable(i)  <--- what value is i ?
« Last Edit: December 22, 2011, 05:57:38 PM by RD »

Ryan

  • Administrator
  • *****
  • Posts: 145
    •  
Sorry about that. It looks like these variables are not exposed in the enumeration. The integer values should work though.

The tube taper angle is 29. The rest of the variables are for the PRSEUS concept.

29   Tube Taper Angle
31   Rod Stiffened - Stringer Height
32   Rod Stiffened - Frame Web - Thickness
33   Rod Stiffened - Frame Height
34   Rod Stiffened - Frame Spacing
35   Rod Stiffened - Frame Flange Width
36   Rod Stiffened - Frame Flange Thickness
37   Rod Stiffened - Rod - Diameter
38   Rod Stiffened - Frame Clear Span
41   Rod Stiffened - Foam - Thickness
42   Rod Stiffened - Top Face - Thickness
43   Rod Stiffened - Stringer Spacing
44   Rod Stiffened - Stringer Flange Width
45   Rod Stiffened - Stringer Flange Thickness
46   Rod Stiffened - Stringer Clear Span

-Ryan


RD

  • *
  • Posts: 5
    •  
thanks Ryan

looks like you could update your online help, so information like this is available and easier to find.
(right now you only show up to vpdLAST=28)

Ryan

  • Administrator
  • *****
  • Posts: 145
    •  
The VariableParameterDefinition topic has now been updated to reflect the missing parameters.