News: HyperSizer.com has a Community Board and Customer Support System. Submit a ticket at http://hypersizer.com/ticket

Author Topic: Geometry Rule 40 - OrthoGrid  (Read 427 times)

mjlafrenier

  • Client
  • **
  • Posts: 4
    •  
Geometry Rule 40 - OrthoGrid
« on: March 24, 2021, 10:14:46 AM »
For orthogrid smeared stiffened panels (option 1), is it true that the geometry rule 40 is only checking one direction (L_y/S_0 >= 3)?

It appears from the Material and Analysis Detail ASCII output file (*.MTL) that only the one direction was checked.

Thanks,
Mike