News: Contact us to upgrade your software!

Author Topic: Interlaminar Tension (AID 204)  (Read 51609 times)

joaquingut

  • Client
  • **
  • Posts: 4
    •  
Interlaminar Tension (AID 204)
« on: January 04, 2018, 07:28:41 PM »
Does Hypersizer calculate the radii used in equation 4.2 (HME Methods and Equations
Composite Strength, Ply-Based) from the mesh? We have to analyze some parts that have variable curvature and this would be very handy.

James

  • Administrator
  • *****
  • Posts: 286
    •  
Re: Interlaminar Tension (AID 204)
« Reply #1 on: January 04, 2018, 10:04:52 PM »
Yes, the radius is computed from the grid locations. The radius of curvature is calculated per component, as described in the following help topic.

https://hypersizer.com/help_7.3/#FE-Shells/shell-buckling_span.php
See "Radius of Curvature Calculation"

The curvature is displayed on the "Buckling" tab and used for interlaminar tension, sandwich flatwise tension and panel buckling.

I hope this is helpful.

-James