News: HyperSizer.com has a Community Board and Customer Support System. Submit a ticket at http://hypersizer.com/ticket

Author Topic: Analysis Defaults  (Read 33968 times)

alan.mclaughlin

  • Client
  • **
  • Posts: 1
    •  
Analysis Defaults
« on: March 15, 2019, 09:46:28 AM »
Hello,

I've been going through the list of analysis defaults having a look at the documentation and i'm struggling to find some info on what checks hypersizer is making for:-

Buckling, Local

Local Buckling, Shear, Permanent Deformation (Metalic)

Joint

Web Normal Compression or Pull off
Web Shear
Web Interaction

Sandwich

Compostie Strength, Interlaminar Shear

If possible can you point me the relevant areas of the documentation?

Thanks

Alan

James

  • Administrator
  • *****
  • Posts: 286
    •  
Re: Analysis Defaults
« Reply #1 on: April 29, 2019, 07:36:48 AM »
The "Local Buckling, Shear, Permanent Deformation (Metalic)" is documented in the local post buckling HME. See: http://hypersizer.com/help_7.3/#StressAnalysis/pb-about.php%3FTocPath%3DStress%2520Analysis%7CPostbuckling%7C_____1

The joint normal and compression pull-off methods are documented here:
http://hypersizer.com/help_7.3/#FEM%20Joints/fem-joints-report.php%3FTocPath%3DFeatures%7CFEM%2520Joints%7C_____6

The interlaminar shear method is documented here:
http://hypersizer.com/help_7.3/#StressAnalysis/sa-panel_stiffness-outofplane.php%3FTocPath%3DStress%2520Analysis%7CPanel%2520Stiffness%2520Formulation%7C_____3

I hope this is helpful.

-James