Engineering & Analysis Methods > Miscellaneous Analysis & Methods
Analysis Defaults
(1/1)
alan.mclaughlin:
Hello,
I've been going through the list of analysis defaults having a look at the documentation and i'm struggling to find some info on what checks hypersizer is making for:-
Buckling, Local
Local Buckling, Shear, Permanent Deformation (Metalic)
Joint
Web Normal Compression or Pull off
Web Shear
Web Interaction
Sandwich
Compostie Strength, Interlaminar Shear
If possible can you point me the relevant areas of the documentation?
Thanks
Alan
James:
The "Local Buckling, Shear, Permanent Deformation (Metalic)" is documented in the local post buckling HME. See: http://hypersizer.com/help_7.3/#StressAnalysis/pb-about.php%3FTocPath%3DStress%2520Analysis%7CPostbuckling%7C_____1
The joint normal and compression pull-off methods are documented here:
http://hypersizer.com/help_7.3/#FEM%20Joints/fem-joints-report.php%3FTocPath%3DFeatures%7CFEM%2520Joints%7C_____6
The interlaminar shear method is documented here:
http://hypersizer.com/help_7.3/#StressAnalysis/sa-panel_stiffness-outofplane.php%3FTocPath%3DStress%2520Analysis%7CPanel%2520Stiffness%2520Formulation%7C_____3
I hope this is helpful.
-James
Navigation
[0] Message Index
Go to full version