News: has a Community Board and Customer Support System. Submit a ticket at

Author Topic: Stress Report - Laminate Analysis (Open Hole)  (Read 32100 times)


  • *
  • Posts: 42
Stress Report - Laminate Analysis (Open Hole)
« on: June 18, 2009, 10:35:32 AM »
If the user requests only a laminate analysis the stress report does not show the lay-up in section 3 of the stress report. If both lamina and laminate analysis is requested the lay-up is defined. A short term work around.

Also, the laminate allowable properties should be quoted for reference in the allowables section of the stress report.
David Johnson
Hitech Global Solutions Inc