News: HyperSizer Pro V7.3.24 just Released!  Contact us to upgrade your software!

Author Topic: Stress Report - Laminate Analysis (Open Hole)  (Read 5273 times)

Stressed

  • *
  • Posts: 42
    •  
Stress Report - Laminate Analysis (Open Hole)
« on: June 18, 2009, 10:35:32 AM »
If the user requests only a laminate analysis the stress report does not show the lay-up in section 3 of the stress report. If both lamina and laminate analysis is requested the lay-up is defined. A short term work around.

Also, the laminate allowable properties should be quoted for reference in the allowables section of the stress report.
David Johnson
Hitech Global Solutions Inc