News: HyperSizer.com has a Community Board and Customer Support System. Submit a ticket at http://hypersizer.com/ticket

Author Topic: AID113 - Isotropic Strength, Von Mises  (Read 89737 times)

mrpothier

  • Client
  • **
  • Posts: 2
    •  
AID113 - Isotropic Strength, Von Mises
« on: May 31, 2017, 08:10:04 AM »
Hi,

In AID 113 there is a shear stress calculation for stiffeners.  How is this stress calculated?  I can't reproduce it with the loads I have for this stiffener.

Note that we also use AID 254 for a stiffener Von Mises check, which yields a zero shear stress. I have some sample calculations for this analysis which go through the shear stress calculations, but I still cannot match what I am seeing from AID 113.

Thank you

James

  • Administrator
  • *****
  • Posts: 286
    •  
Re: AID113 - Isotropic Strength, Von Mises
« Reply #1 on: June 05, 2017, 12:26:25 PM »
Have you tried to export an analysis detail spreadsheet? These are very helpful for verifying the analysis results.

See: https://hypersizer.com/help_7.3/#ReportMS/report-msdetail-create.php%3FTocPath%3DStress%2520Reports%7C_____4

-James