News: Need training? HyperSizer Training Videos are available now! Learn more here: https://hypersizer.com/trainingevents/e-learning/

Author Topic: OrthoGrid Sandwich - can you provide a description?  (Read 27482 times)

cpoteet

  • Client
  • **
  • Posts: 4
    •  
OrthoGrid Sandwich - can you provide a description?
« on: July 19, 2019, 10:48:51 AM »
Hi All, I was looking through the hypersizer concepts and found something named "OrthoGrid Sandwich" under the Orthogrid/Isogrid family.  It wasn't clear from the inputs exactly what this concept represents, can someone provide more info or a diagram?  Thanks, Carl

James

  • Administrator
  • *****
  • Posts: 286
    •  
Re: OrthoGrid Sandwich - can you provide a description?
« Reply #1 on: July 19, 2019, 12:15:30 PM »
The orthogrid sandwich concept is basically an orthogrid panel with two facesheets (top and bottom) such that the internal ribs are the middle layer, sandwiched between the facesheets.

Here is a help page that shows the available sizing variables for the grid concepts. Orthogrid sandwich is included.
http://hypersizer.com/help_7.3/#Concepts/fam-04-grid.php

I hope this is helpful. Let me know if you have any further questions.

-James

cpoteet

  • Client
  • **
  • Posts: 4
    •  
Re: OrthoGrid Sandwich - can you provide a description?
« Reply #2 on: July 19, 2019, 12:37:49 PM »
Thanks James.  The graphic is misleading for this concept.  My initial interpretation was correct, but when I saw the graphic I thought it must be something else.